Welcome to our websites!

Products

  • Mixed nitrile gloves production line

    Mixed nitrile gloves production line

    Nitrile compound gloves have the advantages of nitrile gloves and PVC gloves. They are immersed in mixed raw materials. The inner layer of the gloves is smooth and easy to wear. The gloves have better elasticity than PVC gloves and are low in cost. The outer layer of the glove has a certain coefficient of friction, is easy to use, and reaches the standard of smooth external and internal smooth.

  • General PVC glove production line

    General PVC glove production line

    The PVC glove production line adopts continuous production method and direct immersion method, with uniform film formation and bright color. Various models and specifications can be produced online at the same time. The length of the production line is 60 meters, 80 meters and 100 meters, etc., with high automation and large output. It can be configured with automatic demoulding, and the length of the production line can be designed and installed according to the customer’s production site.

  • Food grade PVC glove production line

    Food grade PVC glove production line

    PVC gloves are widely used in daily life, with health protective effect, good protective performance, safety and non-toxic, welcome by the use of protection.Products in the developed countries and regions have a broad market.The products are divided into powdered gloves (in the process, a small amount of corn flour is attached to the surface of gloves to keep the gloves smooth and smooth) and powder-free gloves (in the process, PU treating agent is used to replace corn flour to play the same role).From the level, there are mainly medical grade gloves of industrial grade gloves (distinguishing index is mainly the size of the needle eye rate);From the model is divided into XSSMLXL lengthened, thickened, lengthened and so on.After investigation, the products are mainly published in the powder industrial level and powder free doctor chat level SMLXL, ML as the main products.

  • Sterilization grade nitrile gloves production line

    Sterilization grade nitrile gloves production line

    The sterilization-grade glove production line is mainly to produce nitrile gloves that meet European and American standards. The differences from the ordinary nitrile glove production line are:

    1. Raw material: medical grade nitrile latex

    2. Production line: precision of production line equipment

    3. Supporting facilities: additional soaking, drying, and ethylene oxide sterilization

    4. Chemical formula: proprietary formula for medical sterilized gloves

    5. Testing: manually testing each glove

  • PVC glove production line

    PVC glove production line

    In the production of gloves, the main raw materials and auxiliary materials are first placed in a special container and mixed in a certain proportion to form an emulsion. After filtering, vacuuming, and standing, the mixture is sent to the dipping tank in the production line with a pump. .Under normal production conditions, the hand molds on the assembly line automatically enter the dipping tank through the chain, and the hand molds that adhere to the emulsion come out of the dipping tank in turn, and continuously rotate while traveling to make the emulsion on the surface of the hand mold uniform and make the excess The lotion dripped down. The dripping liquid returns to the immersion tank through the collection tank. After dripping the excess emulsion, the hand mold moves into the oven with the production line. Under this condition, the emulsion on the hand mold is cured and formed. The hand molds out of the oven go through processes such as natural cooling, crimping, and counting.

  • Latex glove production line

    Latex glove production line

    The raw materials of latex gloves are pumped into the raw material tank by a diaphragm pump for mixing and preparation, and then transported to various locations on the latex glove production line for immersion during the operation of the production line.

    First, the ceramic hand model will be cleaned with acid, alkali and water; then the model will be immersed in hot water for cleaning. After that, the clean mold needs to be immersed in coagulant and other raw materials; the dipping procedure is as follows: the cleaned mold is first immersed in hot water and heated until it is dipped in the coagulant and dried for dipping. After dipping, it is sent to the oven for preliminary drying, adding fiber inner sleeve, flushing hot water and then sending to the oven for vulcanization, drying and forming. After the gloves are demolded, they are inflated, checked, shaped at low temperature, dried at medium temperature, washed with water, dehydrated, dried, and then packed and sent to the finished product warehouse.

  • Medical examination Nitrile Glove Production Line

    Medical examination Nitrile Glove Production Line

    The non-sterile medical nitrile glove production line is the same as the ordinary nitrile glove production line. The difference is that the quality of raw materials requires medical grade, is mainly divided into: mixing system, main production line system, energy system, auxiliary equipment, laboratory equipment, packaging equipment, Green facilities,Post-processing equipment.

  • General examination nitrile glove production line

    General examination nitrile glove production line

    As a rising star among rubber gloves, nitrile gloves must have strong market potential. Looking at the domestic and foreign markets, the market scale of the nitrile glove industry is constantly expanding or even exceeding expectations. According to market research data, the rubber glove market is in the late stage of growth, and the market has a clear trend of expansion. The development trend of nitrile rubber glove accident flapper valve will continue to rise. Nitrile gloves are one of the most popular disposable gloves. These disposable nitrile gloves are organic compounds synthesized from acrylonitrile and butadiene. They are latex-free and non-allergenic. They are very popular in the European and American markets. Setting up a nitrile glove production line can quickly open the market and obtain a large number of orders.

  • CM-GMS45*6 Nitrile Glove Production Line

    CM-GMS45*6 Nitrile Glove Production Line

    CM-GMS45*6 Chuangmei Intelligent Mini Nitrile Glove Production Line

    Advantages of Mini Nitrile Gloves Production Line:

    01 Fully automatic nitrile glove production line to improve production efficiency

    02 The production process of the whole process is stable, and the consistency of the product is improved

    03 Suitable for mass production, reducing enterprise production costs

    04 Customized design, more in line with actual needs

    05 Structured design, save transportation space, easy to install

    06 The service life is more than 10 years

     

  • General examination nitrile glove production line

    General examination nitrile glove production line

    The latex gloves are made of natural latex as the main raw material. The latex gloves are cleaned by acid and alkali first and washed by water. The cleaned model is first immersed in hot water and heated until the gelling agent is soaked and dried. After soaking, send to the oven for preliminary drying, flushing hot water and then send to the oven for curing, drying and forming. After demolding, the gloves are inflated or watered for inspection, washed, dehydrated and dried, and then packed and sent to the finished product warehouse.

  • Medical examination latex gloves production line

    Medical examination latex gloves production line

    Since the 1980s, with the spread of multiple bacteria, the number of medical workers wearing gloves has increased sharply, and people’s awareness of environmental protection and self-protection has increased. Now the world’s annual demand for latex gloves is about 30 billion, and this A number will continue to grow.

  • Medical Surgical Latex Glove Production Line

    Medical Surgical Latex Glove Production Line

    The 2019 Coronavirus (COVID-19) is affecting the entire global market. In addition to the cost of human life, the impact of the spread of the virus on the global economy has only just begun to be recognized and has a profound impact on the world’s technology supply chain. In this case, the global demand for medical gloves has skyrocketed.In the critical period of epidemic prevention and control, masks and medical rubber surgical gloves are one of the most scarce protective equipment for front-line medical personnel.

12 Next > >> Page 1 / 2